data：

material thickness：0.5 -5.0mm

sheet width：500-1800mm

sheet length：1000-5000-10000mm

stacker height：600mm

stacker weight：max 10 tons

speed: 120m/min

 Range of application 

Supporting Metal Sheet Slitting Line, especially for continuous cutting, finished product stacking, and scrap collection.
This system is suitable for stacking all types of metal sheets.

Features
The continuous stacking of sheets is achieved using vacuum suction, which maximizes surface quality, especially for strip production with high surface quality requirements, preventing surface scratches. It ensures neat and aesthetically pleasing stacks with a layer offset of less than 0.5mm. Compared to traditional air cushion and mechanical stacking systems, it offers clear advantages and a wider range of applicability, suitable for both thick and thin sheets.

• The vacuum stacking device's control panel uses a touchscreen to display stacker speed and quantity, making operation convenient.
• The vacuum stacking system functions properly even with surface paper or film on the metal.
• Handling head and tail scrap is convenient, with automatic collection into dedicated waste bins.
• It is equipped with a three-stage cushioning system to minimize damage to the leading edge of the sheets.
• The stacking speed range is wide, from 10m/min to 150m/min.
• It can be designed with dual stackers, enabling continuous production during the switching process.
• Suitable for a wide range of thicknesses, from 0.1mm to 10mm.

Incoming Material Requirements

• The incoming sheets must be within a width tolerance of 50I.
• The surface must be smooth and flat.
• For sheets with high oil content, suction cup marks may remain on the surface.
• For materials with length errors greater than 0.5mm, the stack offset may exceed 1mm.